NetBSD 1.6.1 (GENERIC) #0: Tue May 27 11:24:04 JST 2003 root@AnimalPC:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III (Tualatin) (686-class), 863.95 MHz cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way cpu0: L2 cache 512 KB 32b/line 8-way cpu0: features 383f9ff cpu0: features 383f9ff cpu0: features 383f9ff total memory = 367 MB avail memory = 334 MB using 4730 buffers containing 18920 KB of memory BIOS32 rev. 0 found at 0xf0f40 mainbus0 (root) pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Silicon Integrated System SiS 630 Host Bridge (rev. 0x31) agp0 at pchb0: aperture at 0xd4000000, size 0x4000000 pciide0 at pci0 dev 0 function 1: Silicon Integrated System 5597/5598 IDE controller (rev. 0xd0) pciide0: bus-master DMA support present pciide0: primary channel wired to compatibility mode wd0 at pciide0 channel 0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) pciide0: primary channel interrupting at irq 14 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) pciide0: secondary channel wired to compatibility mode pciide0: secondary channel ignored (disabled) pcib0 at pci0 dev 1 function 0 pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x00) sip0 at pci0 dev 1 function 1: SiS 900 10/100 Ethernet, rev 0x82 sip0: interrupting at irq 5 sip0: Ethernet address 00:80:88:03:1a:b3 icsphy0 at sip0 phy 0: ICS1893 10/100 media interface, rev. 1 icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto autri0 at pci0 dev 1 function 4: Silicon Integrated System SiS 7018 Sound (rev. 0x02) autri0: interrupting at irq 7 autri0: ADS72 codec; headphone, Analog Devices Phat Stereo audio0 at autri0: full duplex, mmap, independent midi0 at autri0: 4DWAVE MIDI UART Silicon Integrated System product 0x7013 (modem communications, revision 0xa0) at pci0 dev 1 function 6 not configured ppb0 at pci0 dev 2 function 0: Silicon Integrated System 86C201 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: Silicon Integrated System product 0x6300 (rev. 0x31) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0x88) at pci0 dev 9 function 0 not configured Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0x88) at pci0 dev 9 function 1 not configured Ricoh product 0x0576 (miscellaneous system) at pci0 dev 9 function 2 not configured fwohci0 at pci0 dev 10 function 0: Texas Instruments product 0x8026 (rev. 0x00) fwohci0: interrupting at irq 4 fwohci0: OHCI 1.1, 00:e0:18:00:03:08:17:bb, 400Mb/s, 2048 max_rec, 4 iso_ctx ohci0 at pci0 dev 15 function 0: NEC USB Host Controller (rev. 0x41) ohci0: interrupting at irq 11 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered ohci1 at pci0 dev 15 function 1: NEC USB Host Controller (rev. 0x41) ohci1: interrupting at irq 7 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 1 port with 1 removable, self powered ehci0 at pci0 dev 15 function 2: NEC USB Host Controller (rev. 0x02) ehci0: interrupting at irq 5 ehci0: EHCI version 0.95 ehci0: companion controllers, 1 port each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wdc1 at isa0 port 0x170-0x177 irq 15 atapibus0 at wdc1 channel 0: 2 targets cd0 at atapibus0 drive 0: type 5 cdrom removable cd0: drive supports PIO mode 4, DMA mode 2 pcppi0 at isa0 port 0x61 midi1 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug 'n Play devices found biomask effd netmask effd ttymask ffff Kernelized RAIDframe activated fw0 at fwohci0: 00:e0:18:00:03:08:17:bb:0a:02:20:00:00:00:00:00 boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs aue0 at uhub1 port 1 aue0: corega K.K. corega FEther USB-TXS, rev 1.10/1.01, addr 2 aue0: Ethernet address 00:0a:79:03:14:c3 acphy0 at aue0 phy 1: ACXXX 10/100 media interface, rev. 0 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)