Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Sat May 24 01:41:53 JST 2003
    root@AnimalPC.localdomain:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ef000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ef0a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 863919946 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b4  Stepping = 4
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 385855488 (367 MB)
avail memory = 367362048 (350 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <J1     J1p     > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 5 entries at 0xc00f1530
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xd4000000-0xd7ffffff at device 0.0 on pci0
atapci0: <SiS 5591 ATA100 controller> port 0xd800-0xd80f at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xd3800000-0xd3800fff irq 5 at device 1.1 on pci0
sis0: Ethernet address: 00:80:88:03:1a:b3
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xd3000000-0xd3000fff irq 7 at device 1.4 on pci0
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 9.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <base peripheral> at device 9.2 (no driver attached)
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd1800000-0xd1803fff,0xd2000000-0xd20007ff irq 4 at device 10.0 on pci0
fwohci0: PCI bus latency was changing to 250.
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:03:08:17:bb
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
ohci0: <NEC uPD 9210 USB controller> mem 0xd1000000-0xd1000fff irq 11 at device 15.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xd0800000-0xd0800fff irq 7 at device 15.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
pci0: <serial bus, USB> at device 15.2 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id = 0xc000ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
pccard0: <unknown card> (manufacturer=0x0032, product=0x2904) at function 0
pccard0:    CIS info: KME, KXLC005, 00
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA100
MBREXT Slice 5 on ad0s3:
0000   00 fe ff ff 0b fe ff ff 3f 00 00 00 93 da 52 00  |........?.....R.|
[0] f:00 typ:11 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:5429907
0000   00 fe ff ff 05 fe ff ff d2 da 52 00 9b 4e 16 00  |..........R..N..|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:5429970 l:1461915
MBREXT Slice 6 on ad0s3:
0000   00 fe ff ff 07 fe ff ff 3f 00 00 00 5c 4e 16 00  |........?...\\N..|
[0] f:00 typ:7 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:1461852
0000   00 fe ff ff 05 fe ff ff 6d 29 69 00 bf 21 1f 00  |........m)i..!..|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:6891885 l:2040255
MBREXT Slice 7 on ad0s3:
0000   00 fe ff ff 83 fe ff ff 3f 00 00 00 80 21 1f 00  |........?....!..|
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:2040192
0000   00 fe ff ff 05 fe ff ff 2c 4b 88 00 de 0a 17 00  |........,K......|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:8932140 l:1510110
MBREXT Slice 8 on ad0s3:
0000   00 fe ff ff 82 fe ff ff 3f 00 00 00 9f 0a 17 00  |........?.......|
[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:1510047
0000   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s1a
acpi_tz0: WARNING - current temperature (54.0C) exceeds system limits